Inverto IDLP-SINF02-OOPRO-OPP Single flens LNB
Inverto IDLP-SINF02 Single flens
Niet op voorraad
SKU
ART.106240
€ 17,94
€ 14,83
Inverto IDLP-SINF02 Single flens
Specifically designed for the European DTH markets, this LNB provides optimized reception capabilities. It enables the reception of signals from one satellite and its distribution to a single tuner Set-top box. It is ready for High Definition transmissions and provides excellent Noise Figure performance. Designed to meet strict specifications and manufactured to the highest industry quality standards , this LNB is an ideal solution for the satellite broadcast reception across Europe.
Main Features
- Low Phase Noise, DVB-S2 (HDTV) compliant
- Low Noise Figure
- Low Power Consumption
- High Cross Polarization Isolation
- High Frequency Stability
| Low Band Input Frequency Range | 10.7 ~ 11.7 GHz |
| Low Band Output Frequency Range | 950 ~ 1950 MHz |
| Low Band LO Frequency | 9.75 GHz |
| High Band Input Frequency Range | 11.7 ~ 12.75 GHz |
| High Band Output Frequency Range | 1100 ~ 2150 MHz |
| High Band LO Frequency | 10.6 GHz |
| Noise Figure | 0.2 dB |
| LO Initial Accuracy | +/- 1.0 MHz Max. |
| LO Temperature Drift | +/- 3.0 MHz Max. |
| Phase Noise (@ 10 kHz) | - 80 dBc/Hz Max. |
| Conversion Gain | 53 ~ 63 dB |
| Gain Ripple (Over 26MHz Bandwidth) | +/- 0.75 dB |
| Gain Variation (Over Full Band) | +/- 4 dB Max. |
| Image Rejection | 40 dB Min. |
| 1 dB Compression Point (@ Output) | 0.0 dBm Min. |
| Cross Polarization Isolation | 22 dB Min. |
| Control Signal Ca (Vertical Polarization) | 11.0 ~ 14.0 V |
| Control Signal Cb (Horizontal Polarization) | 16.0 ~ 20.0 V |
| Control Signal Cc (Band Switching) | 22 +/- 4 kHz |
| Output VSWR | 2.5 : 1 |
| In-Band Spurious | - 60 dBm Max. |
| Current Consumption | 110 mA Max. @ 11 ~ 20 V |
| Operating Temperature | - 25 °C ~ + 60 °C |
| Output Impedance | 75 Ω |
| Output Connector | F-Type (Female) |
| Weight | 130 g |
| Merk | Inverto |
|---|
Schrijf uw eigen review
